Freetech Scorpioni P6F91i-2M, Instrukcje do płyt głównych
[ Pobierz całość w formacie PDF ]
P6F91
i
Quick Reference
int
e
l
Pentium II & Celeron CPU Soft-Menu Settings
1) Turn the system on, then press <
DEL>
key to access the AWARD BIOS
SETUP program. A “
CMOS SETUP UTILITY
” will display on the screen.
Select “
LOAD SETUP DEFAULTS
” and type “Y” to load BIOS optimal
setup.
2) After the BIOS optimal setting is set, at the top right hand side of the
“Chipset Feature Setup”
screen, there is a
“CPU Speed”
options. Refer
to the table below and select the correct CPU speed.
3) Select “
STANDARD CMOS SETUP
” to set the Date /Time, Floppy drive
type, and set Hard Disk Type to “Auto”.
4) Select “
SAVE & EXIT SETUP
” and press the <Enter> key to save the set-
ting information in the CMOS memory and continue with the booting pro-
cess.
CPU Bus Clock=100MHz:
CPU SPEED
Soft-Menu Setting
350MHz
100MHz
3.5
400MHz
100MHz
4.0
450MHz
100MHz
4.5
*500MHz
100MHz
5.0
CPU Bus Clock=66MHz:
CPU SPEED
Soft-Menu Setting
233MHz
66.6MHz
3.5
266MHz
66.6MHz
4.0
300MHz
66.6MHz
4.5
333MHz
66.6MHz
5.0
NOTE:
“*” Some higher frequency CPUs are not available yet, the clock setting for
those CPUs are for reference only.
FILE NAME:
082498
R
F96x-1.DOC
Copyright Notice
C
Copyright 1998.
The information contained in the user’s manual and all accompa-
nying documentation is copyrighted and all rights are reserved.
This publication may not, in whole or in part, be reproduced,
transcribed, stored in a retrieval system, translated into any lan-
guage or computer language, or transmitted in any form whatso-
ever without the prior written consent from the manufacturer,
except for copies retained by the purchasers for their personal
archival purposes.
The manufacturer reserves the right to revise this user’s manual
and all accompanying documentation and to make changes in the
content without obligation to notify any person or organization of
the revision or change.
IN NO EVENT WILL THE VENDOR BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSE-
QUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THIS PRODUCT OR DOCUMENTA-
TION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT
HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE,
OR DATA STORED OR USED WITH THE PRODUCT,
INCLUDING THE COSTS OF REPAIRING, REPLACING, OR
RECOVERING SUCH HARDWARE, SOFTWARE, OR
DATA.
All trademarks mentioned in this document are acknowledged.
The Specification on the manual is subject to change without
notice.
2 P6F91
i
User’s Manual
Table Of Contents
Chapter 1
Introduction
1.1 Overview
1.2
P6F91
i
Specifications/Features
1.3 P6F91
i
Mainboard Layout
1.4 Microprocessor
1.5 Pentium II Packaging
1.6 Chipset
1.7 Main Memory
1.8 Accelerated Graphics Port (AGP) slot
1.9 Enhanced IDE Support
1.10 Keyboard, Mouse and USB Interface
1.11 Real-time Clock, CMOS RAM and Battery
1.12 IrDA Infrared Support
1.13 Power Management
1.14 System Power On/Off Control
1.15 System Sleep / Resume
1.16 System Manageability
1.17 Wake On LAN (WOL)
5
7
10
11
11
11
12
13
13
14
15
15
15
16
17
17
17
Chapter 2
Hardware Installation
2.1 Unpacking
2.2 Installation
2.2.1 Attaching Connectors
2.2.2 Installing CPU
2.2.3 Removing the Processor
2.2.4 Installing System Memory
2.2.5 Clear CMOS and Password
2.2.6 Auto Power On
2.2.7 PS/2 keyboard & mouse Power Selection
2.2.8 CPU Bus Over-Clock Selection
2.2.9 Intel Pentium II CPU Soft-Menu Setting
2.2.10 System Clock (CPU Bus Clock)
18
18
20
25
28
29
30
30
31
31
32
34
P6F91
i
User’s Manual 3
Chapter 3
BIOS Configuration
3.1 Entering Setup
3.2 CMOS Setup Utility
3.3 Standard CMOS Setup
3.4 IDE HDD Auto Detection
3.5 Load Setup Defaults
3.6 Save & Exit Setup
3.7 Exit Without Saving
3.8 BIOS Features Setup
3.9 Chipset Features Setup
3.10 Power Management Setup
3.11 PnP/PCI Configuration
3.12 Integrated Peripherals
3.13 Supervisor / User Password
36
37
38
40
41
41
41
42
45
49
53
55
58
Chapter 4
Driver and Utility
4.1 Flash Utility
4.2 EIDE Bus Master Driver
4.3 System Environment Monitor
4.3.1 Hardware Doctor Setup
4.3.2 Setting the Threshold
59
59
60
60
62
4 P6F91
i
User’s Manual
[ Pobierz całość w formacie PDF ]